Network NX-6 fails to warn before alarming

Reply

  #1  
Old 07-31-11, 11:09 AM
E
Member
Thread Starter
Join Date: Jul 2011
Location: United States
Posts: 2
Received 0 Votes on 0 Posts
Network NX-6 fails to warn before alarming

-When my alarm is disarmed and i open a door/window, i hear two dings. When it's armed and i activate a zone i hear nothing, until it's too late and my alarm is going off and i'm receiving a call from my alarm company. Is there anyway i can configure my system so that when i open my front door, and the alarm is set, my keypad gives me a warning beep before it alarms and calls my monitoring service? Any help would be greatly appreciated. Thanks!
 
Sponsored Links
  #2  
Old 07-31-11, 02:58 PM
M
Forum Topic Moderator
Join Date: Jun 2000
Location: Gainesville, FL, USA
Posts: 16,640
Received 88 Votes on 83 Posts
Is that door configured as an entry/exit zone?
 
  #3  
Old 07-31-11, 03:02 PM
E
Member
Thread Starter
Join Date: Jul 2011
Location: United States
Posts: 2
Received 0 Votes on 0 Posts
I can only assume so; this is the front door. It takes approx 30 seconds (if the system is armed) for the alarm to sound once the door is opened.
 
  #4  
Old 08-01-11, 07:54 PM
G
Member
Join Date: Aug 2006
Location: USA
Posts: 1,413
Received 0 Votes on 0 Posts
Sounds like the installer may have enabled the silent keypad option in *93 programming....Have them check this..
 
Reply
Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Thread Tools
Search this Thread
 
Ask a Question
Question Title:
Description:
Your question will be posted in: