Safewatch 3000i / Vista-20p radio supervision


Old 10-02-12, 08:18 PM
Thread Starter
Join Date: Oct 2011
Location: USA
Posts: 1
Received 0 Votes on 0 Posts
Safewatch 3000i / Vista-20p radio supervision


Searching online and coming across this forum, I have a problem I can't seem to fix with the basic information provided, unless of course I'm missing a step.

As most, I became tired of ADT's fee for monitoring my alarm system and discontinued it as the contract expired. This resulted in a communication error, "Zone 04 - Check Radio Supervision". I have the Safewatch 3000 system, the vista-20p. It was monitored via a regular pots line and gsm backup. I attempted to remove this fault by removing the programming from *41 and *42 followed by exiting with *99 and when the system reboots it still presents the error code.

Any tips, tricks or other thoughts to stopping this?
Sponsored Links
Old 10-03-12, 02:51 AM
Forum Topic Moderator
Join Date: Jun 2000
Location: Gainesville, FL, USA
Posts: 16,386
Received 43 Votes on 42 Posts
*29 0 to turn off radio supervision, _and_ you have to disconnect the radio from the system, mechanically. (power the system down while disconnecting the data connections). You may also have a relay connection to zone 4. Without seeing exactly which radio you have, it's hard to be more specific.

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off

Thread Tools
Search this Thread
Ask a Question
Question Title:
Your question will be posted in: