Networx 540 phone module problems
#1
Member
Thread Starter
Join Date: May 2013
Location: USA
Posts: 5
Upvotes: 0
Received 0 Upvotes
on
0 Posts
Networx 540 phone module problems
Having trouble with a 540 phone module. When calling in remotely, operator answers and once you type in your password, the module will drop the call. It has been working for a number of years and just in the past 5 days or so stop working.
If anyone has come across this issue before or has any helpful ideas on how I may troubleshoot this problem, I would appreciate any feedback.
Thanks
Lefty
If anyone has come across this issue before or has any helpful ideas on how I may troubleshoot this problem, I would appreciate any feedback.
Thanks
Lefty
#6
Forum Topic Moderator
If it's just DSL, adding an alarm DSL filter to the RJ-31x jack will typically solve the problem.
Changing to derived phone lines is more difficult. Different phone adaptors do a better job than others in creating a "phone line". A lot of these devices like the 540 simply won't work with many derived phone lines.
It _could_ simply be that the NX-540 has succumbed to entropy and needs to be replaced.
Again, specifics matter...
Changing to derived phone lines is more difficult. Different phone adaptors do a better job than others in creating a "phone line". A lot of these devices like the 540 simply won't work with many derived phone lines.
It _could_ simply be that the NX-540 has succumbed to entropy and needs to be replaced.
Again, specifics matter...