Napco Magnum Alert 1000 Code Reset
#1
Member
Thread Starter
Join Date: Aug 2013
Location: USA
Posts: 1
Upvotes: 0
Received 0 Upvotes
on
0 Posts
Napco Magnum Alert 1000 Code Reset
Hello, I changed the code to my security system by accident (long story), and no longer can arm/disarm the system. I still have the dealer code and wanted to know if there was a way to change the code with the dealer code, and not completely wipe out my system.
Thanks!!
-5koliny
Thanks!!
-5koliny
#2
Forum Topic Moderator
If your user program code is still at the default of 123456 you can use the procedure on page 7 of the installer manual: http://www.napcosecurity.com/images/...I465G_INST.pdf
I'm not sure if the dealer code will do the same thing...
I'm not sure if the dealer code will do the same thing...