This is the motion detector in question: [url=http://imgur.com/zyagJwB]imgur: the simple image sharer[/url] According to my panel, all it says is : Zone 3 , Not Ready, and Chime. None of these seem to relate to why the detector is beeping so freqeuently! Any help would be much appreciated!

Hi everyone, I have a Concord Express 60-806 security system. I was getting some false positives so I put in all new sensors and reprogrammed the system. Everything is working as expected except I cannot get the system to "chime" when a door is opened or closed (even though I have it programmed as 7-1 chime on, and the sound on close option is on). If I set it to security level 1 (which is says it has to be on in order for the chime function to work) - it just won't work. The displays all show "chime". If I open a door, it shows "alarm zone X" and just sits there until I cancel the alarm. No sounds at all on open or close. This was working perfectly before and would always do the double beep when a door was open (on security level 1) but I've read through the manual several times and tried everything I can find but still can't get it to work. I have the master, programming, and user codes and used them all to get this far. I have not rewired anything at the main box itself, so that's all the same. I'm guessing it's some odd programming option I need to turn on, but I just can't seem to find it. Thanks!