ADT Safewatch Pro 3000
#1
05-22-15, 03:37 PM
ADT Safewatch Pro 3000
I have just purchased a home with an existing ADT Safewatch Pro 3000 system. I have the access code and the manual. I do not want to continue the monitoring with ADT, but want to utilize the alarm. I have read the previous threads, an I am afraid everyone is a few steps ahead of me. I do not have a land line, and want to have alarm notifications sent to my cell phone. What equipment do I need to do this. Thanks for any help!!
#2
05-22-15, 08:07 PM
Basically, you have two choices:
An add on cellular dialer unit: United Security Products Cellular Dialer Wireless Security Systems
Or an internet system like the Envisalink: https://www.eyez-on.com/EZMAIN/Image...tartEyezOn.pdf
An add on cellular dialer unit: United Security Products Cellular Dialer Wireless Security Systems
Or an internet system like the Envisalink: https://www.eyez-on.com/EZMAIN/Image...tartEyezOn.pdf
#3
06-03-15, 02:49 PM
Member
Join Date: Jun 2015
Location: usa
Posts: 4
Upvotes: 0
Received 0 Upvotes
on
0 Posts
Ok, I know that this is not quite the correct spot for this but I have dinner on the stove. I have a safewatch pro 3000en, recently I noticed that the siren only makes a quick yelp when the alarm is tripped, instead of sounding like an actual siren..... Any ideas? The only thing that may have changed is that I eliminated our phone service. No, our system was not monitored, hasn't been in years, but it was still wired to the alarm. I am not sure it the yelp problem existed before I eliminated the landline
#4
06-03-15, 07:41 PM
Typically, for Vista panels (and their clones) that means that your battery is on it's last legs. The siren draws heavily on the battery in alarm mode.
(SW-3000 is a modified Vista 20p)
(SW-3000 is a modified Vista 20p)
