Dsc alarm pc1616 help needed
#1
Member
Thread Starter
Join Date: Jun 2015
Posts: 3
Upvotes: 0
Received 0 Upvotes
on
0 Posts
Dsc alarm pc1616 help needed
Hi, I just finished programming my alarm system and I'm having trouble with the zone 1 which is my front door programmed on delay 1 settings. When I arm the system all seems normal the door icon disappear when i open and shut the door but when i reopen the door to test the entry delay, the alarm goes off instantly. Even if I set delay 1 to 30 30 30, alarm always goes off when i open the door.
Thanx for the help!
Thanx for the help!
#2
Member
Join Date: Jun 2011
Location: USA
Posts: 238
Upvotes: 0
Received 0 Upvotes
on
0 Posts
Check your zone type in 001, first set should be 01.
005 sets entry 1, 2, and exit. From what you desrcibed they are all. 30 seconds which is fine but just wanted you to be aware.
005 sets entry 1, 2, and exit. From what you desrcibed they are all. 30 seconds which is fine but just wanted you to be aware.
#5
Member
Thread Starter
Join Date: Jun 2015
Posts: 3
Upvotes: 0
Received 0 Upvotes
on
0 Posts
Update...
The siren only goes off on delay entry if the door chime option is enabled on the keypad. Is there a way to keep door chime (wife really wants that option) and not have the siren go off?? Or is it maybe a defective board?
Thanx for the help!
The siren only goes off on delay entry if the door chime option is enabled on the keypad. Is there a way to keep door chime (wife really wants that option) and not have the siren go off?? Or is it maybe a defective board?
Thanx for the help!
#6
Forum Topic Moderator
Make sure you are completely timed out. DSC panels have an exit error feature that is enabled, by default, that makes the siren sound if a door is opened right at the end of the exit delay time out.