GE Concord Alarm


  #1  
Old 08-25-15, 11:48 AM
C
Member
Thread Starter
Join Date: Aug 2015
Location: Canada
Posts: 1
Upvotes: 0
Received 0 Upvotes on 0 Posts
GE Concord Alarm

Hey Everyone,

I recently bought a house with a GE alarm installed.
With the help of this forum, I've found the codes I need to get into the settings. Thanks for that!

However, the alarm beeps at certain times of the day. First is at 8am, second is at 6pm and then the final at 9pm. On the screen it says 'phone failure', and I'm sure this is because I have no active phone line. The green light for 'Ready' is never lite up.

I've tried to get into the System Programming with 8-4321-00 but nothing happens. 8-4321-03 gets me into the Quick Programming though.

How I stop the beeping? Please help me someone.

[ATTACH=CONFIG]55136[/ATTACH]
 
Attached Images  

Last edited by Centerline; 08-25-15 at 11:53 AM. Reason: adding picture of alarm
  #2  
Old 08-25-15, 02:15 PM
M
Forum Topic Moderator
Join Date: Jun 2000
Location: Gainesville, FL, USA
Posts: 15,532
Received 293 Upvotes on 268 Posts
I suspect that you don't have the correct keypad model to access installer programming.

Any of the following models will let you access programming:

• SuperBus 2000 2x16 LCD touchpad
• SuperBus 2000 2x20 LCD touchpad
• SuperBus 2000 2x20 VFD touchpad
• SuperBus 2000 ATP 1000 touchpad
• SuperBus 2000 ATP 2100 touchpad
• SuperBus 2000 ATP 2600 touchpad

manual: http://site.geoarm.com/pdfs/GE/conco...tall-guide.pdf
 
 

Thread Tools
Search this Thread
 
Ask a Question
Question Title:
Description:
Your question will be posted in: