Honeywell 5804E Keyfob with Vista 20P & 6160RF Programming

Reply

  #1  
Old 11-11-15, 06:05 PM
Member
Thread Starter
Join Date: Oct 2015
Posts: 10
Received 0 Votes on 0 Posts
Honeywell 5804E Keyfob with Vista 20P & 6160RF Programming

I finally got rid of my Brinks system and installed Vista 20p & 6160RF keypad.
Everything works fine, except when it comes to the Keyfob programming

The keyfob is honeywell 5804E and it was from the existing Brinks system.

To program it, I used the *56, and follow the step as shown in the youtube link below. Basically, I managed to program/learn every single loop (4,3,2) into the system (including with Serial #), BUT when I try to press the button (everyone of them), nothing happens. The "away", "stay" and "off" not working whatsoever.

Did i miss anything?

Youtube link:
Youtube - programming 5804
 
Sponsored Links
  #2  
Old 11-11-15, 09:04 PM
Forum Topic Moderator
Join Date: Jun 2000
Location: Gainesville, FL, USA
Posts: 16,163
Received 25 Votes on 24 Posts
With a Vista 20p, you have to assign the keyfob to the user code. Look in the section of the installer manual on setting codes.
 
  #3  
Old 11-11-15, 09:31 PM
Member
Thread Starter
Join Date: Oct 2015
Posts: 10
Received 0 Votes on 0 Posts
Thank you Thank you again RonFL.

Assign the User Code to "User 02" to the Keyfob, and Whalla....it works.
Appreciate your help and time again RonFL
 
Reply

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Thread Tools
Search this Thread
Display Modes
 
Ask a Question
Question Title:
Description:
Your question will be posted in: