DSC Pc1616 alarm problems
#1
Member
Thread Starter
Join Date: Sep 2014
Posts: 9
Upvotes: 0
Received 0 Upvotes
on
0 Posts
DSC Pc1616 alarm problems
I have a problem with my Dsc pc1616...
I'm trying to install everything but I'm having the zone 1-6 with nothing connected since I have everything wireless ..
This is what I did: *8. 5555. 013 1 turn of the board and power back on.
But the board still see the zones 1-6 open?
I'm trying to install everything but I'm having the zone 1-6 with nothing connected since I have everything wireless ..
This is what I did: *8. 5555. 013 1 turn of the board and power back on.
But the board still see the zones 1-6 open?
#2
Forum Topic Moderator
9
You can go into zone programming and set all the hardwire zones to zone type 00, that will make the system ignore them.
It's simpler to just use the resistors that came with the system to jumper the zones closed (turn the EOL requirement back on). That way if you choose to use the hardwire zones, later, they will be ready to go.
It's simpler to just use the resistors that came with the system to jumper the zones closed (turn the EOL requirement back on). That way if you choose to use the hardwire zones, later, they will be ready to go.