2nd owner - no code for DSC 1832

Reply

  #1  
Old 04-09-16, 06:26 PM
Member
Thread Starter
Join Date: Apr 2016
Location: USA
Posts: 1
Received 0 Votes on 0 Posts
2nd owner - no code for DSC 1832

The previous owner gave me what they "thought" was their code for the security system. But, it wasn't correct so I cannot use the system. I disconnected the power in hopes that it would reset but that didn't work.

I would certainly appreciate any advice on how to override the system and reset the code.
 
Sponsored Links
  #2  
Old 04-09-16, 07:33 PM
Forum Topic Moderator
Join Date: Jun 2000
Location: Gainesville, FL, USA
Posts: 16,274
Received 34 Votes on 33 Posts
As you may have figured out, simply powering the system down doesn't clear or default the system. It won't even disarm it.

You can check and see if the default installer code is still in place by keying in *8 5555. If it beeps rapidly and goes into programming mode; then press the # key several times to exit programming, then we can help you extract/change your master user code.

If it doesn't do so, then short of a lucky guess at either the master or installer code, your only practical choice would be to do a hardware default, and have to program the system over, from scratch.

Read over the installer manual, and let us know what parts you have trouble following: http://cms.dsc.com/download.php?t=1&id=17007
 
Reply

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Thread Tools
Search this Thread
 
Ask a Question
Question Title:
Description:
Your question will be posted in: