DSC PC1555 PGM outputs


  #1  
Old 05-13-16, 02:40 PM
Nanto's Avatar
Member
Thread Starter
Join Date: May 2016
Location: M騙ico
Posts: 4
Received 0 Votes on 0 Posts
Smile DSC PC1555 PGM outputs

Hi everyone.
I知 new with alarm systems, I知 working with a PC1555 of DSC and rn I知 focused on working on pgm outputs, so I have this question:
How does the 21 y 22 options work? They just say 擢or future use so I知 not sure how do they work.
I put the pgm outputs as 21 while connected to a 120V lamp, which works perfectly with other pgm options, as 06 (ready to arm), 07 (keypad buzzer follower mode) etc. But with 21 and 22 options nothing happened.
Any comments will be well received. Have a great day!
 
  #2  
Old 05-13-16, 04:52 PM
M
Forum Topic Moderator
Join Date: Jun 2000
Location: Gainesville, FL, USA
Posts: 16,946
Received 126 Votes on 117 Posts
It means that there was no function defined for those addresses in the firmware. They do nothing.
 
  #3  
Old 05-13-16, 06:36 PM
Nanto's Avatar
Member
Thread Starter
Join Date: May 2016
Location: M騙ico
Posts: 4
Received 0 Votes on 0 Posts
Is there any way to download the firmware to the board? If not, why do they exist? :c
 
  #4  
Old 05-14-16, 09:19 AM
M
Forum Topic Moderator
Join Date: Jun 2000
Location: Gainesville, FL, USA
Posts: 16,946
Received 126 Votes on 117 Posts
The PC 1555 has been a discontinued model for the better part of a decade. There are no updates, nor is there a way to "flash" the firmware.

In current models (PC1616/PC1832/PC1864) those locations are used for two additional command outputs.
 
  #5  
Old 05-15-16, 03:17 PM
Nanto's Avatar
Member
Thread Starter
Join Date: May 2016
Location: M騙ico
Posts: 4
Received 0 Votes on 0 Posts
Oh right. Well thanks Sir
 
 

Thread Tools
Search this Thread
 
Ask a Question
Question Title:
Description:
Your question will be posted in: