GE Simon XT Flood/Freeze
#1
Member
Thread Starter
Join Date: Jun 2015
Location: Canada
Posts: 21
Upvotes: 0
Received 0 Upvotes
on
0 Posts
GE Simon XT Flood/Freeze
Hi everyone. Is it normal for my panel to always report my flood/freeze sensor as "open"? It's kind of annoying, it's nice when you hit "status" and it says "system OK", but obviously it's not doing this now. If this is normal, is there anyway around it? I've got it programmed into group 29. Thanks in advance everyone!
#2
Forum Topic Moderator
One of the quirks of Simons and Concords is that you can enroll a transmitter or hardwired device into the system in the opposite condition that is "normal" for that device.
Re read the instructions for the device, and you may have to delete it and learn it in, again.
Re read the instructions for the device, and you may have to delete it and learn it in, again.