GE Simon XT Flood/Freeze

Reply

  #1  
Old 08-20-16, 09:49 AM
Member
Thread Starter
Join Date: Jun 2015
Location: Canada
Posts: 21
Received 0 Votes on 0 Posts
GE Simon XT Flood/Freeze

Hi everyone. Is it normal for my panel to always report my flood/freeze sensor as "open"? It's kind of annoying, it's nice when you hit "status" and it says "system OK", but obviously it's not doing this now. If this is normal, is there anyway around it? I've got it programmed into group 29. Thanks in advance everyone!
 
Sponsored Links
  #2  
Old 08-20-16, 03:24 PM
Forum Topic Moderator
Join Date: Jun 2000
Location: Gainesville, FL, USA
Posts: 16,204
Received 30 Votes on 29 Posts
One of the quirks of Simons and Concords is that you can enroll a transmitter or hardwired device into the system in the opposite condition that is "normal" for that device.

Re read the instructions for the device, and you may have to delete it and learn it in, again.
 
Reply

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Thread Tools
Search this Thread
Display Modes
 
Ask a Question
Question Title:
Description:
Your question will be posted in: