Cleaned sticky ADT 3000 keypad - now LCD doesnt work

Reply

  #1  
Old 12-21-16, 04:06 AM
M
Member
Thread Starter
Join Date: Dec 2016
Location: USA
Posts: 1
Received 0 Votes on 0 Posts
Cleaned sticky ADT 3000 keypad - now LCD doesnt work

I opened my ADT 3000 in order to clean a sticky keypad. Put it back in place and keypad works properly but LCD display does not. I know I must have reassembled wrong but cant figure out how to put that little display glass back in properly. Cant find any drawing or schematic on how to do that.
 
Sponsored Links
  #2  
Old 12-21-16, 02:50 PM
M
Forum Topic Moderator
Join Date: Jun 2000
Location: Gainesville, FL, USA
Posts: 16,697
Received 92 Votes on 85 Posts
The LCD is simply socketed onto the PC board. It's very possible that whatever you used to clean the keypad components damaged those connections. Some of these devices use a conductive adhesive to keep things connected.

You probably need to replace the keypad (A "Safewatch 3000" is a slightly modified Vista 20p). The replacement is going to be a 6160 keypad (if your original was a full alphanumeric) or a 6150 if it was the simpler display.
 
Reply
Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Thread Tools
Search this Thread
 
Ask a Question
Question Title:
Description:
Your question will be posted in: