NX-8v2 service light issue
#1
Member
Thread Starter
Join Date: Mar 2017
Posts: 2
Upvotes: 0
Received 0 Upvotes
on
0 Posts
NX-8v2 service light issue
Hello, I have a nx-8v2 with a nx-1448e keypad. I have been able to remove my phone line issues, but I am unable to clear what I believe to be expander box tamper problem. After entering *2, there is only a 6 showing and unable to scroll up or down.
I have opened the keypad and the tamper switch inside seems ok, also I can hear it click shut when replacing the cover.
Can anybody please help?
Cheers
I have opened the keypad and the tamper switch inside seems ok, also I can hear it click shut when replacing the cover.
Can anybody please help?
Cheers
#2
Forum Topic Moderator
Trouble 6 is telephone fault.
User manual page 15: https://www.securtek.com/products-se...8%20keypad.pdf
If you disconnected the phone line, in system programming make sure that location 37, segment 3-option 6 is turned OFF, and location 40 segment 5 needs to be set back to 0 to turn off the phone line fault monitor feature.
Installer manual: http://static.interlogix.com/library...n%20Manual.pdf
User manual page 15: https://www.securtek.com/products-se...8%20keypad.pdf
If you disconnected the phone line, in system programming make sure that location 37, segment 3-option 6 is turned OFF, and location 40 segment 5 needs to be set back to 0 to turn off the phone line fault monitor feature.
Installer manual: http://static.interlogix.com/library...n%20Manual.pdf