nx8v2/148E-RF

Reply

  #1  
Old 08-25-17, 07:40 AM
B
Member
Thread Starter
Join Date: Aug 2017
Location: USA
Posts: 19
Received 0 Votes on 0 Posts
nx8v2/148E-RF

Mr. Ron,
My garage door alarm wireless transmitter gave me a fault on zone 13. Tried changing battery and no change. Bought new wireless sensors GE SECURITY 60-362-10-319.5 NX-650 WIRELESS. Deprogrammed old sensor
*8
master code 1234
192#
413#
press 1 disable
* * exit exit
Added new sensor to alarm and heard ding dong.
New sensor works, states zone okay while using enclosed magnet on reed switch, but when I wire it to (rollup door A) sensor/magnet used for rollup door, states fault.
I took my other rollup door B transmitter (I have two rollup doors A and B) and it works on the other rollup door A sensor/magnet where I am trying to install a new transmitter.
Taking new transmitter and putting it on the rollup door B still states fault. So new transmitter states fault on both rollup door sensors/magnets.
I have proved both of my sensor/magnets for both rollup doors are good.
Seems like I cannot program a new transmitter to either rollup door sensor/magnet. Only sensor that I can program to either rollup door and it not give fault message is rollup door B's old transmitter.
Please see pictures. What can I be missing?
Thanks
 
Attached Images   
Sponsored Links
  #2  
Old 08-25-17, 09:13 AM
B
Member
Thread Starter
Join Date: Aug 2017
Location: USA
Posts: 19
Received 0 Votes on 0 Posts
Basically, I cannot use the rollup door magnet/sensor with any of the new transmitters I purchased. Using the small magnet up against the reed switch works. Please advise.
 
  #3  
Old 08-25-17, 03:59 PM
G
Member
Join Date: Aug 2006
Location: USA
Posts: 1,412
Received 0 Votes on 0 Posts
You need to program the Input Options for those wireless zone numbers....

"Transmitter options
Door/window transmitter settings
To set features 4 (Input option 1) and 5 (Input option 2) for
door/window transmitters, do the following:

To disable the transmitter’s internal reed s
witches, turn on
feature 4.

Turn on feature 5 for a normally closed (N/C) external
contact; turn off feature 5 for a normally open (N/O)
external contact.
 
Reply

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Thread Tools
Search this Thread
 
Ask a Question
Question Title:
Description:
Your question will be posted in: