Vista 20p - Set up central station programming


  #1  
Old 09-25-17, 10:29 PM
J
Member
Thread Starter
Join Date: May 2014
Location: Usa
Posts: 56
Upvotes: 0
Received 0 Upvotes on 0 Posts
Vista 20p - Set up central station programming

Hi everyone who's can help me out how to setup or programming an central station in the vista 20P,
The line is Analog
Thanks a lot
 
  #2  
Old 09-26-17, 02:32 AM
M
Forum Topic Moderator
Join Date: Jun 2000
Location: Gainesville, FL, USA
Posts: 15,629
Received 322 Upvotes on 297 Posts
Program the receiver phone number in *41
The account number goes in *43
The report format is set in *48 (the default, contact ID is probably already set)
Each zone that will activate the dialer needs a report code programmed in (any non-zero value to make contact ID work)

Installer manual: http://www.dslreports.com/r0/downloa...ationGuide.pdf
 
  #3  
Old 09-26-17, 05:26 PM
J
Member
Thread Starter
Join Date: May 2014
Location: Usa
Posts: 56
Upvotes: 0
Received 0 Upvotes on 0 Posts
Thanks a lot MrRonFl
One more thing i make an schedule with my vista 20P for the Automatic arm and disarm, how can you bypass a zone in this section
this for stay and away.
Please confirm thanks
 
  #4  
Old 09-26-17, 05:57 PM
M
Forum Topic Moderator
Join Date: Jun 2000
Location: Gainesville, FL, USA
Posts: 15,629
Received 322 Upvotes on 297 Posts
User manual page 37: https://www.security.honeywell.com/d...a15p_20pUM.pdf

Automatic arming in either stay or away mode automatically bypasses any open zones.
 
  #5  
Old 09-27-17, 10:29 PM
J
Member
Thread Starter
Join Date: May 2014
Location: Usa
Posts: 56
Upvotes: 0
Received 0 Upvotes on 0 Posts
Ok thanks a lot.
I will read the manual
 
 

Thread Tools
Search this Thread
 
Ask a Question
Question Title:
Description:
Your question will be posted in: