Using VOIP with NX-6V2

Reply

  #1  
Old 05-17-18, 11:02 AM
Member
Thread Starter
Join Date: Jun 2009
Location: USA
Posts: 76
Using VOIP with NX-6V2

Hi All,
System is using internet via NX-595E for reporting. Phone (VOIP) and internet is provided by Comcast (Xfinity).
If I wanted to connect the VOIP line to the panel, do I need an adapter or dialer?
Thanks!
 
Sponsored Links
  #2  
Old 05-17-18, 03:51 PM
Forum Topic Moderator
Join Date: Jun 2000
Location: Gainesville, FL, USA
Posts: 15,709
If the cable derived voice line is a decent quality (and most of the cable adapters are) you can simply treat it as a land line. Best practice is to treat the phone adapter as if it were a POTS demarc, and wire your RJ-31x appropriately.
 
Reply

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Thread Tools
Search this Thread
Display Modes