garage door opener open by itself

Reply

  #1  
Old 11-23-18, 10:45 AM
W
Member
Thread Starter
Join Date: Jul 2011
Location: USA
Posts: 123
Received 0 Votes on 0 Posts
garage door opener open by itself

My garage door opener is Wayne Delton Quantum 3316. Last week, one remote controller does not work, so I re-active it by press coding, and it works again. But, one trouble comes out, the garage door will open automatically w/o press any control bottom. I removed battery from remote controller, but door still open automatically without press any controller open bottom sometime (It looks it open by itself afternoon most time). Any idea? Is it possible there is self time setting to open door by itself or somebody near me has same code to open the doors.
 
Sponsored Links
  #2  
Old 11-23-18, 11:17 AM
Gunguy45's Avatar
Super Moderator
Join Date: Dec 2007
Location: USA
Posts: 21,113
Received 3 Votes on 3 Posts
Code the same is unlikely... I would suspect something wrong with the wall station or wiring. Because of it's age, I can't really find much...but I would reprogram the wall station...or disconnect it completely and see if the problem keeps happening.

https://homeguides.sfgate.com/progra...16-103023.html

It is possible, since we don't know your location, that some sort of new radio or radar installation is overloading the electronics and causing it to open. This used to be pretty common before the security codes and different remote frequencies were implemented.
 
  #3  
Old 11-24-18, 09:59 AM
W
Member
Thread Starter
Join Date: Jul 2011
Location: USA
Posts: 123
Received 0 Votes on 0 Posts
I do have two remote controls. Before this situation happens, one of two works well for years. After I activate another one this time, this situation happens same day (door automatically open). When I activate another one this time, I also tried to activate another old wall station, but this work station does not work, no matter how to do. Is there any connection between two?
 
  #4  
Old 11-24-18, 10:10 AM
W
Member
Thread Starter
Join Date: Jul 2011
Location: USA
Posts: 123
Received 0 Votes on 0 Posts
Originally Posted by wen831 View Post
My garage door opener is Wayne Delton Quantum 3316. Last week, one remote controller does not work, so I re-active it by press coding, and it works again. But, one trouble comes out, the garage door will open automatically w/o press any control bottom. I removed battery from remote controller, but door still open automatically without press any controller open bottom sometime (It looks it open by itself afternoon most time). Any idea? Is it possible there is self time setting to open door by itself or somebody near me has same code to open the doors.
1. I have three remote controllers. one of three controllers works well for years. This time, I activated another two remotes, which did not work before activating and they are working by test. I have also activated wall station, but it did not work. The garage door open automatically by itself after I tried to activate two remotes and one work station. Is there connections between this procedures.
2. As your suggestions, I disconnect all activated controllers, only one which works for years, same situation happens.
 
  #5  
Old 11-30-18, 02:22 PM
W
Member
Thread Starter
Join Date: Jul 2011
Location: USA
Posts: 123
Received 0 Votes on 0 Posts
the problem is solved by dis connect all. Thanks
 
Reply
Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Thread Tools
Search this Thread
 
Ask a Question
Question Title:
Description:
Your question will be posted in: