Panel to control electronic lock exit


  #1  
Old 01-29-19, 12:08 PM
T
Member
Thread Starter
Join Date: Dec 2018
Location: United States
Posts: 2
Upvotes: 0
Received 0 Upvotes on 0 Posts
Question Panel to control electronic lock exit

All, I am looking for guidance on how to wire a DSC Neo 2064 panel so that it triggers an exit command on an electronic lock. The lock is self powered and controlled, but the board has a screw down terminal for a push button which triggers the lock to release. I would like to use a command on the alarm itself to trigger that open command (basically a closed loop). The panel has 4 PGM output but they supply voltage on command and I'm not sure that is what I need. Guidance is appreciated.
 
  #2  
Old 01-29-19, 02:29 PM
T
Member
Join Date: Sep 2015
Location: US
Posts: 1,234
Received 209 Upvotes on 183 Posts
Take a look at this thread.
 
  #3  
Old 01-30-19, 05:55 PM
M
Forum Topic Moderator
Join Date: Jun 2000
Location: Gainesville, FL, USA
Posts: 15,588
Received 314 Upvotes on 289 Posts
Close, but in this case, you need a clean "dry contact" to trigger your door controller. You would need to use the PGM output to drive a relay to switch your door mechanism.
 
 

Thread Tools
Search this Thread
 
Ask a Question
Question Title:
Description:
Your question will be posted in: