Konnected


  #1  
Old 05-05-19, 09:08 AM
S
Member
Thread Starter
Join Date: May 2016
Posts: 19
Received 0 Upvotes on 0 Posts
Konnected

I'm setting up Konnected, which is a DIY security system. The system can be powered from your existing hard wired alarm panel and the instructions linked below say to use the AUX output but looking at my board, I don't see an AUX output. Is it labeled something else on my board? Please see attached image. https://docs.konnected.io/security-a...m/wiring/power

Name:  lb.jpg
Views: 282
Size:  128.5 KB
 

Last edited by PJmax; 05-05-19 at 09:57 AM. Reason: resized/labeled picture

Top Answer

 
05-05-19, 09:58 AM
PJmax's Avatar
PJmax
PJmax is offline
Group Moderator
Join Date: Oct 2012
Location: Jersey
Posts: 64,928
Received 3,947 Upvotes on 3,540 Posts
The GND and +12V are the terminals you use for AUX power.
 
  #2  
Old 05-05-19, 09:58 AM
PJmax's Avatar
Group Moderator
Join Date: Oct 2012
Location: Jersey
Posts: 64,928
Received 3,947 Upvotes on 3,540 Posts
The GND and +12V are the terminals you use for AUX power.
 
shobuddy, Tony Montes voted this post useful.
  #3  
Old 05-05-19, 12:28 PM
S
Member
Thread Starter
Join Date: May 2016
Posts: 19
Received 0 Upvotes on 0 Posts
PJ to the rescue! As always, thank you!
 
 

Thread Tools
Search this Thread
 
Ask a Question
Question Title:
Description:
Your question will be posted in: