Bleeder T-connectors?

Old 11-08-06, 09:31 AM
BillMullin's Avatar
Thread Starter
Join Date: Jun 2004
Location: Tucson, AZ
Posts: 28
Upvotes: 0
Received 0 Upvotes on 0 Posts
Question Bleeder T-connectors?


I have 2 swamp coolers on my house. I've tried them with and without bleeders, and the pan looks about 500% better at the end of the season when I DO use the bleeder. My problem is that the plastic T-connectors don't seem to make it all the way through a season. So what I'd like to find is a brass, stainless, or Teflon T-connector, or anything else that will last, or even a cheap source of replacements - anything is better than having to buy the entire bleeder kit just for that one connector! The O.D. measurements of the T are roughly 0.50" x 0.18".

Can anyone help?

Thanks, Bill
Old 11-15-06, 07:27 AM
Ed Imeduc's Avatar
Join Date: Aug 2002
Location: Mountain Williams Missouri
Posts: 17,505
Upvotes: 0
Received 1 Upvote on 1 Post

Cant you run the water line in 1/4" od then you can get the brass T you want. Or set the units up so when the go off they flush out.

Thread Tools
Search this Thread
Ask a Question
Question Title:
Your question will be posted in: