Go Back

DoItYourself.com Community Forums > Exterior Improvement Center > Exterior Paneling and All Exterior Sidings

Reload this Page

>

external wall insulation for older farm house

external wall insulation for older farm house

Closed Thread

Search this Thread

#1

Old

06-15-09, 03:21 PM

P

PaulMillbrook

PaulMillbrook is offline

Member

Thread Starter

Join Date: Jun 2009

Location: Canada

Posts: 1

Upvotes: 0

Received 0 Upvotes on 0 Posts

external wall insulation for older farm house

looking for suggestions for insulating and sealing an exterior bricked wall, then final finish on same.

thanks Paul

Upvote

#2

Old

06-15-09, 04:11 PM

B

Bud9051

Bud9051 is offline

Member

Join Date: Oct 2008

Location: New England

Posts: 9,460

Received 47 Upvotes on 43 Posts

Brick often has to breathe. Here is a link that may provide some guidance.
BSD-106: Understanding Vapor Barriers —

Bud

Upvote

Thread Tools

Search this Thread

Show Printable Version

Show Printable Version

Email this Page

Email this Page

Exterior Paneling and All Exterior Sidings
Cleaning and Maintaining 35 yr old Cedar Shakes

E

edge10 on Jun 13, 2009

I would like to get some input on cleaning 35 yr old cedar shake. Applying a preservative, if any, is also a question. The cedar shake was applied over the existing painted cedar shingle, which seemed to have helped prevent rot by preventing excess moisture behind the shingle. The research so far has turned up some conflicting info. Some recommendation are to leave the shake alone, since the natural cedar oil are a preservative. Power washing should not be use or done a very low pressure so as not to remove the cedar oils and remove the wood pith. Others recommend power washing and applying linseed oil. Lastly, other say others say linseed oil will retain moisture and cause rot in a cedar shake.Read More
Exterior Paneling and All Exterior Sidings
Sealing Vents in Vinyl Siding

E

EricSwansn on Jun 16, 2009

We have 2 pipes, PVC I guess, that come through the wall of our house. They are intake and exhaust for the gas furnace. They were never sealed where they pass through the vinyl siding. What should I use to seal the gap between the siding and the walls of the pipes? Caulk? Putty? Something specifically made for this job that I don't yet know about? Thank you, EricRead More

Ask a Question