Smart Siding Installed Over T111
#1
09-10-12, 05:17 PM
Smart Siding Installed Over T111
I have a shed that has old t111 siding that is rotten on the bottom. I was going to cut out the rot, splice in a new piece that is primed with oil base primer, then install Smart Siding over it. Anyone see any thing wrong with this? Thanks.
#2
09-10-12, 05:32 PM
Group Moderator
Sounds okay provided the t1-11 is laying flat. Some of that stuff liked to hump out between the studs, which would telegraph to the surface of the new siding.
#3
09-11-12, 05:04 PM
Yea, if the integrity is not good anywhere else I will cut it out. My advice is to prime the bottom of T-111, smart siding or any other wood siding with oil based primer. I would likely not have this problem if I had done that.
