DIY Vinyl Mounting Blocks?
#1
Member
Thread Starter
Join Date: Apr 2014
Posts: 2
Upvotes: 0
Received 0 Upvotes
on
0 Posts
DIY Vinyl Mounting Blocks?
I am having vinyl installed on my house, and I plan on installing a trellis over the garage, and so I need to install brackets that mount flush and square. The brackets are 3.5"W x 24"L. I can't find a mounting block large enough to mount these. Any ideas on how I could make my own, maybe using PVC or cedar? I think the blocks would need to be about 8"W x 30"L.
#2
I would modify each bracket with a wedge shaped piece of cedar rather than running a complete board the length of the trellis. As long as the brackets themselves are plumb the world is good.