Engine driven pump
#1
Member
Thread Starter
Join Date: Jun 2010
Location: USA
Posts: 1
Upvotes: 0
Received 0 Upvotes
on
0 Posts
Engine driven pump
I purchased a foreign made engine driven water pump but unfortunately the threads on intake and exit ports will not accept the hoses I purchased. I suspect the threads are metric. The pump appears to be similar to the Tsurumi TE2-80HA 3' model. I am attempting to replace the ports with Tsurumi parts. Does anyone know where I can buy parts for this model. Searching the Tsurumi web site does not give an option for parts
dvernon
dvernon
#2
Group Moderator
Here is a link to a parts breakdown for that pump: Equipment2U.com . The top discharge casting is $52 and the intake fitting is $29.
I just did a search for "Tsurumi TE2-80HA parts" and many places popped up so it should not be too difficult to find someone you like. You may have to wait for someone to order the parts for you. Those two pieces are not a normal wear item so nobody I checked has them in stock.
I just did a search for "Tsurumi TE2-80HA parts" and many places popped up so it should not be too difficult to find someone you like. You may have to wait for someone to order the parts for you. Those two pieces are not a normal wear item so nobody I checked has them in stock.