Vinyl gate

Reply

  #1  
Old 06-14-19, 10:44 AM
Member
Thread Starter
Join Date: Jan 2005
Location: southeast pennsylvania
Posts: 318
Vinyl gate

I recently installed several lengths of 4' high vinyl fencing by Veranda. Because of the height of the fencing I had to put it into the ground so it wouldn't stand so high because my wife and I both felt it would be too tall. So I dug a ditch to make it about 3' high. I got an extremely good price at Home Depot for the fencing and that's why I bought it. I have one opening where there should be a gate but the price of a 3' gate is insanely high (over $200). Can anyone show me how to build a 3' vinyl gate? I have one section of the 4' fencing left over. Thanks.

Rich
 
Sponsored Links
  #2  
Old 06-14-19, 11:19 AM
Group Moderator
Join Date: Mar 2003
Location: NC, USA
Posts: 20,077
Likes Received: 99
Can you take your 4' fence section apart?
 
  #3  
Old 06-14-19, 11:21 AM
Member
Thread Starter
Join Date: Jan 2005
Location: southeast pennsylvania
Posts: 318
Not very easily. The way it was made the cross pieces are cut and fitted with the uprights and to take it apart you almost have to ruin it. I tried that and it is not easy.
 
  #4  
Old 06-14-19, 12:58 PM
Group Moderator
Join Date: Mar 2003
Location: NC, USA
Posts: 20,077
Likes Received: 99
If you can't take it apart then shortening it will be very difficult.
 
  #5  
Old 06-14-19, 01:18 PM
Member
Thread Starter
Join Date: Jan 2005
Location: southeast pennsylvania
Posts: 318
That's exactly what I have run into. Thanks for your help and have a great day.
 
Reply

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Thread Tools
Search this Thread
Display Modes