Quadra fire Castile insert help please


  #1  
Old 01-22-13, 10:13 PM
N
Member
Thread Starter
Join Date: Jan 2013
Location: Usa
Posts: 1
Received 0 Votes on 0 Posts
Quadra fire Castile insert help please

Our quadra fire Castile insert had a catastrophic failure and caught fire into the hopper. After the fire we have removed the stove and have replaced the 3 snap switches, vacuum switch, feed motor, and combustion fan and all gaskets. Stove is still not working. The stove powers up, blue light flashes combustion blower starts , after a minute blue lights stop flashing but combustion continuously runs. Whe I turn stove to on the control box red light comes on and combustion fan increases speed the igniter powers up but auger does not turn at all. Please help with what to do next.
 
  #2  
Old 01-23-13, 12:53 AM
PJmax's Avatar
Group Moderator
Join Date: Oct 2012
Location: Northern NJ - USA
Posts: 62,195
Received 1,531 Votes on 1,414 Posts
You're going to need a meter to do some testing.

Below is the schematic. You'll need to check the pressure switch after inducer blower starts.

The manual and this schematic in the link,
http://hearthnhome.com/downloads/ins...s/7021_130.pdf
 
Attached Images  
 

Thread Tools
Search this Thread
 
Ask a Question
Question Title:
Description: