Vintage metal bookcase question

Reply

  #1  
Old 07-02-19, 09:03 AM
Member
Thread Starter
Join Date: Jul 2019
Location: United States
Posts: 2
Vintage metal bookcase question

Hello...I'm in need of ID'ing and sourcing a couple dozen shelf pegs/brackets as shown in the attached image. Nothing readily available in hardware stores, or even what I've found online seem to work. Any ideas would be immensely appreciated!
 
Attached Images  
Sponsored Links
  #2  
Old 07-02-19, 09:18 AM
Forum Topic Moderator
Join Date: Mar 2005
Location: USA - N.E.Tn
Posts: 45,512
Likes Received: 46
How wide are the shelves? how much weight is put on them?
You might take a strip of steel and bend it with pliers to make your own brackets.
 
  #3  
Old 07-02-19, 09:26 AM
Member
Thread Starter
Join Date: Jul 2019
Location: United States
Posts: 2
It's unfortunately meant to hold quite a few hard cover books, so it'll be heavy. Worth a shot though!
 
  #4  
Old 07-02-19, 11:15 AM
Forum Topic Moderator
Join Date: Mar 2005
Location: USA - N.E.Tn
Posts: 45,512
Likes Received: 46
If the original brackets held the weight, making new ones out of the same gauge steel should be ok. You just don't want to use thinner steel.
 
Reply

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Thread Tools
Search this Thread
Display Modes