Go Back

DoItYourself.com Community Forums > Hardware, Tools, Wood & Metal Working, Home & Business Security > Furniture, Wood and Cabinetry Finishing

Reload this Page

>

Water based poly over oil based?

Water based poly over oil based?

Closed Thread

Search this Thread

#1

Old

02-09-07, 11:23 AM

S

swstar

swstar is offline

Member

Thread Starter

Join Date: Mar 2005

Location: CANADA

Posts: 65

Upvotes: 0

Received 0 Upvotes on 0 Posts

Water based poly over oil based?

Can water based polyurethane be applied over top of an aged oil varnish finish? The original finish is 25 years old, and I just want to freshen, but don't want to have to strip.

Upvote

#2

Old

02-09-07, 03:55 PM

M

marksr

marksr is offline

Forum Topic Moderator

Join Date: Mar 2005

Location: USA - N.E.Tn

Posts: 45,410

Received 785 Upvotes on 688 Posts

I've heard that it can providing the old surface is sanded well. IMO it is better to stick with oil base unless your completely refinishing.

Upvote

Thread Tools

Search this Thread

Show Printable Version

Show Printable Version

Email this Page

Email this Page

Furniture, Wood and Cabinetry Finishing
Poly + Oil

J

jfrano on Feb 06, 2007

In an old post someone suggested when using Polyurethanes to add linseed oil to help flow. "Polyurethanes and oil based primers lack the amount of oil necessary to flow and level nicely" I'm wondering if this applies to the newer mixturers, which are Poly+Stain...can I add the oil to these as well? ThanksRead More
Furniture, Wood and Cabinetry Finishing
Cloudy streaks on finish

S

shannonjenna on Feb 08, 2007

I posted about the success I had using Polyshades to darken my worn, tired banister. After applying the first coat it looked great! Beautiful! 2nd coat went very well too. Should have just left it alone. While doing the 2nd coat on the underside, I decided to go over a few spots on top to darken them even more. Looked nice until it dried and now I see dull, cloudy streaks all over the place. The only thing I can come up with is that I used a bruch the first 2 applications and it turned out nice. The "touch ups" were done with a foam brush... (because I was getting lazy). Now I don't know what to do! What could have caused the dull streaks? The depth of color is fine throughout. Just the sheen is streaky. I am thinking that I should just go over it one more time tomorrow with my original high quality brush? Should I sand it first? Or should I use another product (like a poly) to even out the sheen since the color is fine? I used the bombay mahagony satin. Ugh. I am so mad at myself for not just leaving it alone! I would really appreciate some advice before I screw it up any further. :( Thanks!Read More

Ask a Question