> >
>

# Choosing the correct drill bit

#1
01-11-21, 06:08 AM
Member
Join Date: Jan 2021
Posts: 1
Choosing the correct drill bit

Hi I am rebuilding a glider rocker and want to replace a piece. I was wondering which drill bit i should use to recreate the following hole. (See image below)

#2
01-11-21, 06:18 AM
Member
Join Date: Jan 2013
Location: U.S.A.
Posts: 2,103
Welcome! A Forstner bit for the large hole followed by a brad point or standard twist bit for the small hole.

julian_s voted this post useful.