Adjusting Wayne-Dalton opener


  #1  
Old 05-18-03, 05:52 AM
rjay9
Visiting Guest
Posts: n/a
Adjusting Wayne-Dalton opener

I'm trying to adjust a Wayne-Dalton garage door opener (Wizard #2115). As expected there is no manual. I need to adjust the down limit level ( sometines the door starts back up when it hits the floor).

Where is it and how do I adjust it?

thanks for any help

jay
 
  #2  
Old 05-21-03, 03:44 PM
Join Date: Dec 1999
Location: South Dakota
Posts: 3,140
Received 0 Votes on 0 Posts
Your adjustment is in the center of a top panel. They are labeled.
I have three of them. Mine came with a book. Good Luck If it hits the floor and goes back up, you need to adjust the down limit, not the tension.
 
  #3  
Old 05-22-03, 05:43 AM
rjay9
Visiting Guest
Posts: n/a
Jack
Thanks for the reply. The tension adjustment seems to be the nut on screw with a spring. But the limit adjustment seem to suggest that you move the whole opener unit forward or backward. Is that right.

thanks

jay
 
  #4  
Old 05-25-03, 01:42 PM
Join Date: Dec 1999
Location: South Dakota
Posts: 3,140
Received 0 Votes on 0 Posts
No, that is not correct. Your limit adjustment is a little screw. One screw for up, and other screw for down. They are marked.
You do not move your opener.
 
 

Thread Tools
Search this Thread
 
Ask a Question
Question Title:
Description: