Garage Door Problem


  #1  
Old 01-05-08, 02:40 PM
B
Member
Thread Starter
Join Date: Apr 2007
Location: North Dakota
Posts: 34
Upvotes: 0
Received 0 Upvotes on 0 Posts
Garage Door Problem

I recently installed new insulated garage doors. They work great. But I had an oversight when I installed them. I forgot to take off the clear plastic covering the doors. Now that it is winter the plastic is starting to peal in places. I tried to remove the plastic from the doors, but found that it is now brittle and stuck very well in some places while pealing in others. As a result it is not coming off in some places. I am hoping somebody might have some suggestions for pealing the plastic off, without maring the surface of the doors. If not, I really have nobody to blame but myself.

Thanks for any advice in advance.
 
  #2  
Old 01-05-08, 09:41 PM
L
Member
Join Date: Dec 2004
Location: Medford, NY
Posts: 134
Upvotes: 0
Received 0 Upvotes on 0 Posts
Your best bet might be to call the manufacture of the door and ask them.
 
  #3  
Old 01-05-08, 10:30 PM
T
Member
Join Date: Aug 2000
Location: USA
Posts: 15,047
Upvotes: 0
Received 2 Upvotes on 2 Posts
A blow dryer might be a possibility to heat up the plastic enough that you can peel it off or remove with plastic scraper.
 
 

Thread Tools
Search this Thread
 
Ask a Question
Question Title:
Description: