Garage door's new 3 steps closing procedure


  #1  
Old 03-27-16, 10:49 AM
B
Member
Thread Starter
Join Date: Sep 2011
Location: usa
Posts: 159
Received 1 Vote on 1 Post
Garage door's new 3 steps closing procedure

Yesterday I noticed that when my garage door is closing it stops mid way, hit the remote, it came down about a foot or two short of closing, hit the remote again and it stopped at say 2 inches above the ground and the last bit closed it. Well when I check it I don't see anything amiss as such I can point to. I always lubricate the garage door system - chain, rail, wheels...in summer with lithium grease, make sure the laser pointers are in proper place, see if there's any thing out of the ordinary, etc. This is the first time this has happened. The house is 20 years. We have been here for at least 8/9, so the unit is at least that old and pro'ly more. I am handy around the house but I have never had to do anything with garage doors. I would like to look into the issue before I have to call in a pro, if so. Is the unit starting to reach the end of life or is it something that can be repaired?

It's a craftsman 1/2hp

P/S
If there's any info you would like to know that will help with an answer please let me know.

Name:  20160327_123640_254.jpg
Views: 224
Size:  30.5 KB
Name:  20160327_123605_689.jpg
Views: 184
Size:  25.9 KB
 
  #2  
Old 03-27-16, 11:12 AM
W
Member
Join Date: Feb 2006
Location: USA
Posts: 6,780
Received 34 Votes on 31 Posts
Door

Check the wire connections at the obstruction sensors on each side of the door.
 
  #3  
Old 03-27-16, 11:33 AM
Norm201's Avatar
Member
Join Date: Sep 2013
Location: United States
Posts: 10,069
Received 354 Votes on 319 Posts
I have the same unit. You may have to do a reset. unplug it for about a minute. Then restore power. try it. If still the same problem get your owners manual out and look up how to set up. I need to go out now so I can't do any more searching until later.
 
  #4  
Old 03-27-16, 04:10 PM
J
Member
Join Date: Jan 2011
Location: USA
Posts: 4,884
Received 102 Votes on 89 Posts
Pull the rope to disconnect the door from the opener.
The door should be able to be open and closed with one hand and stop any place you stop moving it.
Also check all the nuts on the brackets the rollers are mounted to.
 
  #5  
Old 03-28-16, 03:21 AM
Doorman2722's Avatar
Member
Join Date: Oct 2005
Location: upstate NY
Posts: 951
Received 26 Votes on 26 Posts
just by looking at your "force" settings in the first picture...you probably need to increase the up and down force just a bit, It appears to be on the factory settings.
 
 

Thread Tools
Search this Thread
 
Ask a Question
Question Title:
Description: