DoItYourself.com Community Forums > Household Cleaning, Kitchen Appliance Service and Repairs > >Gas< Kitchen Appliances, Dryers and BBQ's

Replacing gas line on stove

Thread Tools

Search this Thread

03-27-03, 07:37 PM

Sausalyn

Member

Thread Starter

Join Date: Apr 2002

Location: Minnesota

Posts: 40

Upvotes: 0

Received 0 Upvotes on 0 Posts

Replacing gas line on stove

According to the home inspector, the gas hook-up to my stove is not up to code. Is this something that I can replace myself or do I need to have the gas company do it? Thanks.

Upvote

03-28-03, 05:07 PM

jeff1

Visiting Guest

Posts: n/a

Hi,

**the gas hook-up to my stove is not up to code**

Hook up??...the flex line??

If yes...this may help...

http://www.applianceaid.com/gasconnector.html

jeff.

Upvote

03-29-03, 08:24 AM

Sausalyn

Member

Thread Starter

Join Date: Apr 2002

Location: Minnesota

Posts: 40

Upvotes: 0

Received 0 Upvotes on 0 Posts

Thanks! Based on the information in the link I need to have a professional replace the gas flex line.

Upvote

Thread Tools

Search this Thread

Show Printable Version

Email this Page

>Gas< Kitchen Appliances, Dryers and BBQ's
Gas Dryer Removal

M

mojostrat on Mar 26, 2003

We're getting rid of our rented gas dryer and getting an electric one (not sure of the cost of operation info on this but I have no choice)... anyway... I need to disconnect the dryer and tried to do so but the shut off valve is not turning at all. I loosened the nut under the valve to see if it would loosed the valve handle but it didn't. Did the PSEG guy glue it in position or what? Sear's is bringing the electric dryer and they said they would disconnect the gas line but I'm not sure if they are going to be able to shut the gas via the valve. (it turned easily when I hooked up the unit prior to the PSEG guy fixing my job. Also, how hard is it to cap this open pipe. thanks, mojostratRead More
>Gas< Kitchen Appliances, Dryers and BBQ's
Gas Dryer - New Belt

M

msussman on Mar 29, 2003

I have a Kenmore gas dryer, about 20 yrs old. works fine, except for the drum drive belt that sort of shredded this morning. Looks like a fairly easy replacement, but i would like to know if there are any pitfalls that i ought to know in advance. Can the job get done through the small front bottom panel, or does the back have to be removed? Thanks. Mike Sussman Pembroke Pines, FLRead More

Ask a Question