Gas Dryer - Not Drying Clothes - Whirlpool LGN1000HQ1


  #1  
Old 12-02-06, 12:00 PM
S
Member
Thread Starter
Join Date: Feb 2005
Posts: 7
Upvotes: 0
Received 0 Upvotes on 0 Posts
Gas Dryer - Not Drying Clothes - Whirlpool LGN1000HQ1

Hello!

I have a Whirlpool Gas Dryer, LGN1000HQ1. The dryer turns on and works, but it is not drying the clothes. I cleaned all the lint on the inside as well as in the vents.

Any ideas? Maybe a sensor or a fuse?

Thanks!

Steve
 
  #2  
Old 12-03-06, 05:51 AM
Sharp Advice's Avatar
Admin Emeritus
Join Date: Feb 1998
Location: The Shake and Bake State USA
Posts: 9,927
Upvotes: 0
Received 7 Upvotes on 6 Posts
Hello Steve and Welcome into my Gas Appliances topic.

Several possible causes. Start by checking the HSI (Hot Surface Igniter). The igniter must be glowing to start the process.

All the possible causes and solutions can be found in the dryer help sticky note. Also in prior asked questions and the answers within them.

Dryer help here: http://forum.doityourself.com/showthread.php?t=159481

Retail appliance parts dealers can also help determine what the most likely possible problem may be. They will need the make, model and serial numbers. Appliance parts dealers are an excellent source for original replacement parts and problem resolving matters. Dealers are listed in the phone book under appliances.

Be sure the electrical power to the appliance is turned off, before attempting any repairs or services. Always check for gas leaks whenever moving the appliance and/or a service or repair includes any connection of a gas part.

Read the existing questions on the subject of dryers. Doing so will more quickly provide you with answers to questions & provide additional information on how to resolve dryer problems.

Web Site Host, Forums Manager, Moderator Hiring and Promotions Agent, Gas Appliances Topic Moderator, Multiple Forums Moderator & Natural Gas Appliance Diagnostics Technician.
 
 

Thread Tools
Search this Thread
 
Ask a Question
Question Title:
Description:
Your question will be posted in: