Gas Dryer No Heat
#1
06-19-10, 07:26 PM
Join Date: Oct 2002
Location: Wally World
Posts: 431
Upvotes: 0
Received 0 Upvotes
on
0 Posts
Gas Dryer No Heat
Maytag DG510. I replaced all solenoid valves three months ago. Everything working fine until today.
Now the ignitor bar heats up but no gas is released so the burner never fires - kinda like one of the solenoids failed again. Except this time, the ignitor bar never turns off, it stays lit up while the dryer is running.
Any ideas?
Thanks!
Now the ignitor bar heats up but no gas is released so the burner never fires - kinda like one of the solenoids failed again. Except this time, the ignitor bar never turns off, it stays lit up while the dryer is running.
Any ideas?
Thanks!
#2
07-08-10, 07:20 PM
Member
Join Date: Feb 2010
Location: usa
Posts: 253
Upvotes: 0
Received 0 Upvotes
on
0 Posts
Did you resolve your problem? If not, have you check this link?
If the ignitor comes on and stays on, it is the flame sensor that is defective.
******
If the ignitor comes on and stays on, it is the flame sensor that is defective.
******
Last edited by Shadeladie; 07-09-10 at 10:01 AM. Reason: Link removed.
