Nat gas pizza oven hookup

Reply

  #1  
Old 08-03-19, 09:08 PM
Member
Thread Starter
Join Date: Aug 2019
Location: Canada
Posts: 1
Received 0 Votes on 0 Posts
Nat gas pizza oven hookup

Hi all, I purchased a NG pizza oven from Italy and would like to get it set up. I have a 1/2 outlet ready for it and the pizza oven has 2 burners, each needing its own 3/8 hose to connect to the burner valve. I was planning to:

- run a quick disconnect from the 1/2 outlet:

https://www.amazon.ca/SHINESTAR-Natu...dp/B07DVKKPVQ/

- screw in a 1/2 male to male brass piece:

https://www.amazon.ca/Anderson-Metal.../dp/B000BQY9XW

- attach a brass 1/2 tee:

https://www.homehardware.ca/en/12-brass-tee/p/3291501

- use the following hose twice, to step down to 3/8 and get the burner valves on:

https://www.amazon.ca/Stanbroil-Non-.../dp/B01LY373D9

Here is a pic of one of the two burner valves (not the flare, not sure if this is an issue?):

Any issues with this plan?
Thanks,

Mark

Name:  o1.jpg
Views: 14
Size:  54.5 KB
 

Last edited by PJmax; 08-04-19 at 03:10 PM. Reason: resized picture
Sponsored Links
  #2  
Old 08-04-19, 07:53 AM
GregH's Avatar
Super Moderator
Join Date: Jan 2001
Location: Manitoba
Posts: 9,983
Received 8 Votes on 8 Posts
Welcome to our forums!

This is an installation that requires a permit and whoever grants it will advise on what components are ok to use.

The hook-up aside there are a few things you will need to address.
The gas appliance needs to be approved and tagged by CSA or similar for use in your area.
Also, the components you use must also be approved, fittings included.
The hose assembly MFR claims it is approved and it appears there is a visible approval mark on the hose but the assembly of hose and fittings needs a separate tag.
 
Reply

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Thread Tools
Search this Thread
Display Modes
 
Ask a Question
Question Title:
Description:
Your question will be posted in: