I recently replaced my oven temperature sensor after getting an F3 error on my Maytag oven Model CHG9830BAB. I am now getting alternating error messages of F3 and F5 and have already done a hard reset by turning off the oven at the breaker. Any ideas?

To preface, I’ve read the other threads and tried many of the troubleshooting things. Before I do anything more drastic, I would love some more input. i have a six burner range, and the bottom left corner one will not light or stop clicking. Looking at the electrode, there is in fact a spark, and gas is let out, but it isn’t lighting. If I light it manually, the burner goes nice, but it continues to click. Inspecting the electrode shows that the gas flame doesn’t go all the way around the burner, and it leaves a nice little pocket where the electrode is, thereby not shorting the sensor and stopping the clicking. Using a lighter to put a flame near the electrode stops the clicking. Strange. i pulled it all apart, cleaned it, same deal. i took apart a working burner and switched all the parts, same burner is the issue, the other one still works. could this be the underlying controller? Maybe there’s an issue with the amount of gas being let out? The burner goes out when I put it on lowest, none of the others have that issues. Can provide more details if needed. Thank you