Hello all! First time to post here and boy is it a doosy. My wife and I just bought our first house back in July. Last month after a long weekend away we came home to find about 100 sq ft of wood laminate flooring warped at the seams. It turns out that when we investigated further that the AC was leaking onto the slab and the water was getting under the floor. I was ok with this until I realized that whoever installed the AC did not apply any PVC glue to the pvc pipes leading into the drain. What would you do in this situation? Now it turns out that the approx 1000 sq ft of formica flooring in the house would have to be removed completely as they don't make this flooring any longer. So, is it an insurance job or call the AC people and see what they can do? Thanks for any help and advice you can give! Cheers, Jason

Oil furnace is Lennox 023 series, approx 7 years old. Thermostat is Honeywell T87F2055 3 8639. Primary control is Honeywell R8184M. Furnace tripped breaker. When reset, furnace fires but fan will not come on with thermostat set to "Auto". It will come on when thermostat is swithced to "Fan On". In cooling mode it will work with thermostat on "Auto" setting. What is this likely to be?