wood stove installation
#1
wood stove installation
[SIZE=1]how do you install a wood stove chimney pipe through the roof of a garage. there is no ceiling only the roof, height from stove to roof about 15-18 feet ,what parts would i need[/SIZE]
#2
Philfromwilmot :
This depends on local codes.
You generall require approved insulated chimney and the fittings that go with it.
The insulated chimney will extend above and below the roof a prescribed distance.
Stove pipe will then connect between the stove and this chimney.
This depends on local codes.
You generall require approved insulated chimney and the fittings that go with it.
The insulated chimney will extend above and below the roof a prescribed distance.
Stove pipe will then connect between the stove and this chimney.
#3
wood heater
i would run the size that currently hooks to the unit, NEVER reduce, a heavy guage single wall pipe, 22 or 24 guage, using as few elbows as possible, and keeping MINIMUN 6 inches clearance to combustibles. use a proper cap, collar and flashing. if you can run doublewall pipe, do it.