Tempstar Gas Furnace Operation


Old 04-30-06, 10:00 AM
Thread Starter
Join Date: Apr 2006
Posts: 1
Received 0 Votes on 0 Posts
Tempstar Gas Furnace Operation

I have a Tempstar gas furnace; model NUGE105KG02 (867.768031); it was installed in 1989. The exhaust blower cycles on (when commanded by the remote theromstat), runs for 3-4 minutes, but the burners do not ignite. The blower/furnace then shuts down. After one or more of these cycles, the sequence is repeated, but the burners ignite, and the heating cycle operates in a normal manner. Any suggestions on the cause of the no-ignite sequence would be appreciated.
Sponsored Links
Old 05-02-06, 04:06 PM
Grady's Avatar
Forum Topic Moderator
Join Date: Jan 2005
Location: Delaware, The First State
Posts: 14,166
Received 19 Votes on 17 Posts
Ignition problem

Not being familiar with this particular model off the top of my head I need answers to a couple of questions. Is the igniton system spark to pilot then main burners or is there a glow before ignition (hot surface ignition)?

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off

Thread Tools
Search this Thread
Ask a Question
Question Title:
Your question will be posted in: