Burner's won't stay on. Please Help

Reply

  #1  
Old 12-21-08, 08:10 AM
Member
Thread Starter
Join Date: Dec 2008
Posts: 1
Rheem classic 90

Let me start off by saying I hope someone can help. I have a Rheem Classic 90 furnace. I woke up this morning to a house temp of about 52. Upon investigation and restarting my furnace i found out the duct fills up with air and after 15 secs. or so the clicking begins the burners come on and then shut off after 4 secs. This will repeat for awhile then whole system shuts down. I did notice yellow blinking light on control panel. Anybody out there think they can help?
 

Last edited by papaBri; 12-21-08 at 09:23 AM.
Sponsored Links
  #2  
Old 12-21-08, 11:14 AM
Member
Join Date: Dec 2006
Location: st louis
Posts: 24
try cleaning flame sensor with some sandcloth....it is located at far left or far right of burners....
 
Reply

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Thread Tools
Search this Thread
Display Modes