Oil home heating system issue

Old 02-05-11, 08:56 AM
Thread Starter
Join Date: Feb 2011
Location: USA
Posts: 1
Upvotes: 0
Received 0 Upvotes on 0 Posts
Smile Oil home heating system issue

I have a property that has an oil heating system and lately it has gone on the fritz. The registers blow out nothing but cold air now. I took a look in the panel on the system and noticed that the red LED was blinking constantly. I pushed the red reset button and everything came to life for awhile and then stopped again... pushed it again and it worked again....it went out again a few hours later...pushed said red button again and now nothing. Any information would help out a lot. Thanks in advance.
Old 02-05-11, 11:02 AM
Grady's Avatar
Forum Topic Moderator
Join Date: Jan 2005
Location: Delaware, The First State
Posts: 12,682
Received 41 Upvotes on 39 Posts
If you have pushed the reset & the burner motor ran but the burner did not fire, DO NOT push it again without some troubleshooting. A make & model of the furnace & burner would be helpful in helping you troubleshoot.

Thread Tools
Search this Thread
Ask a Question
Question Title:
Your question will be posted in: