New couple,valve,pilot and strong pilot flame but no burners.Fan kicks on
#1
Member
Thread Starter
Join Date: Sep 2011
Location: United States
Posts: 33
Upvotes: 0
Received 0 Upvotes
on
0 Posts
New couple,valve,pilot and strong pilot flame but no burners.Fan kicks on
I replaced the pilot, couple and the valve. Now I have strong pilot tthat stays lit but burners don't come on?
I know the couple send a signal identifying that it's safe.
Any thoughts as to why the burners won't kick on?
I know the couple send a signal identifying that it's safe.
Any thoughts as to why the burners won't kick on?
#4
Member
Thread Starter
Join Date: Sep 2011
Location: United States
Posts: 33
Upvotes: 0
Received 0 Upvotes
on
0 Posts
Ok, I'm not sure if it matters but the couple was making contact with the fuel tube. I turned gas off, made sure it wasn't touching it and retried...it's working.
But: i noticed that the flames are seem to be not as strong as they were before and they are further up towards the couple and pilot. The three burners have arrow shaped flanges that the pilot/couple bracket connect to and the flame seems to be making contact with the arrow shape. Is it possibly in my mind that the flames are low (burning blue with about an inch high flame) and should it be burning that far up the burner?
But: i noticed that the flames are seem to be not as strong as they were before and they are further up towards the couple and pilot. The three burners have arrow shaped flanges that the pilot/couple bracket connect to and the flame seems to be making contact with the arrow shape. Is it possibly in my mind that the flames are low (burning blue with about an inch high flame) and should it be burning that far up the burner?
#5
Member
Thread Starter
Join Date: Sep 2011
Location: United States
Posts: 33
Upvotes: 0
Received 0 Upvotes
on
0 Posts
Ok, I found that the flame making contact with that arrow shaped flange isn't an issue but I feel like after viewing the videos, my flames are very low.
thought?
thought?
#6
Member
Thread Starter
Join Date: Sep 2011
Location: United States
Posts: 33
Upvotes: 0
Received 0 Upvotes
on
0 Posts
height of my flame???