AFG oil burner few tweak questions
#1
12-23-11, 09:17 PM
Join Date: Dec 2010
Location: usa
Posts: 33
Upvotes: 0
Received 0 Upvotes
on
0 Posts
AFG oil burner few tweak questions
Hello everyone i had a few questions about my oil heater maybe you guys will know my afg is rated 0.50 to 0.65 and says manufacter nozzle 0.65 by 80 degrees and thats size i usually get when i replace it but i was wondering if i could use a 0.55 or 0.50 by 80 degree nozzle to save on fuel oil?
#3
01-14-12, 06:18 AM
Join Date: Dec 2010
Location: usa
Posts: 33
Upvotes: 0
Received 0 Upvotes
on
0 Posts
#4
01-14-12, 06:22 AM
Join Date: Dec 2010
Location: usa
Posts: 33
Upvotes: 0
Received 0 Upvotes
on
0 Posts
#5
01-14-12, 10:53 AM
Forum Topic Moderator
Join Date: Jan 2005
Location: Delaware, The First State
Posts: 12,667
Received 40 Upvotes
on
38 Posts
If there's a Thermo-Pride sticker on it, yes the burner is a Beckett AFG. I still need the model # of the furnace. Thermo-Pride's model number would be something OH5-85 or OL2-56. Those are just examples of their model numbers but all of their model numbers are in the same format.
