Replacing draft inducer motor unit.


  #1  
Old 10-28-12, 06:55 PM
D
Member
Thread Starter
Join Date: Feb 2006
Location: Ohio, USA
Posts: 52
Upvotes: 0
Received 0 Upvotes on 0 Posts
Replacing draft inducer motor unit.

My draft inducer motor was starting to get very noisy when it would start up.
I purchased a complete unit ICP A141. When I removed the old unit,there as a fiber type gasket material that came off in pieces. How important is it to put this gasket material back on. The new unit did not come with any type of gasket .
My furnace is a Comfortmaker GUI075A12
 
  #2  
Old 10-28-12, 06:58 PM
hvactechfw's Avatar
Member
Join Date: Jan 2011
Posts: 5,491
Upvotes: 0
Received 4 Upvotes on 4 Posts
use high temp silicone in it's place if you are unable to get the ceramic fiber gasket.
 
 

Thread Tools
Search this Thread
 
Ask a Question
Question Title:
Description:
Your question will be posted in: