Ran out of oil --trying to restart furance

Old 12-23-12, 07:00 PM
Thread Starter
Join Date: Dec 2012
Location: United States
Posts: 1
Upvotes: 0
Received 0 Upvotes on 0 Posts
Ran out of oil --trying to restart furance

I have a Beckett AF 15 with a honeywell R7284. I ran out of Oil today I believe. After putting oil in I hit rest button--said hard lockout at the time. It clicked on but did not light. It is a 2 line system. I have gotten conflicting advice--do I need to bleed it. I have hit the rest a couple of times but still not lighting.
Old 12-23-12, 07:10 PM
PJmax's Avatar
Group Moderator
Join Date: Oct 2012
Location: Jersey
Posts: 64,620
Received 3,891 Upvotes on 3,488 Posts
Normally a two line system will bleed itself but it may take a while depending on line length.
Old 12-23-12, 07:39 PM
Join Date: Nov 2011
Location: USA
Posts: 593
Upvotes: 0
Received 2 Upvotes on 2 Posts
It helps if you bleed it.

Thread Tools
Search this Thread
Ask a Question
Question Title:
Your question will be posted in: