kenmore furnace not staying lite


  #1  
Old 12-12-13, 06:26 PM
S
Member
Thread Starter
Join Date: Dec 2013
Location: usa
Posts: 3
Upvotes: 0
Received 0 Upvotes on 0 Posts
kenmore furnace not staying lite

my Kenmore furnace ignites for about 1 minute then shuts down for 4-5 seconds then burners ignite for 25-30 seconds then repeats 4-5 seconds off then 25-30 seconds on any ideas what is going on?
 
  #2  
Old 12-12-13, 08:34 PM
Grady's Avatar
Forum Topic Moderator
Join Date: Jan 2005
Location: Delaware, The First State
Posts: 12,682
Received 41 Upvotes on 39 Posts
Is there any kind of code being blinked on the control board?
 
  #3  
Old 12-13-13, 01:21 AM
S
Member
Thread Starter
Join Date: Dec 2013
Location: usa
Posts: 3
Upvotes: 0
Received 0 Upvotes on 0 Posts
it dosnt have one that I have found.
 
  #4  
Old 12-13-13, 01:32 AM
S
Member
Thread Starter
Join Date: Dec 2013
Location: usa
Posts: 3
Upvotes: 0
Received 0 Upvotes on 0 Posts
it is a Kenmore model number ntc6100gfa1. I have cleaned the flame sensor rod with a bit of sand paper and re installed it , tried it and have gotten the same results. but this time I noticed the tabs that hold the round viewing window where melting. but that time I had started it up I had the access shroud off.
 
 

Thread Tools
Search this Thread
 
Ask a Question
Question Title:
Description:
Your question will be posted in: